Tie Better your flies 1 – tails for dry flies

I decided to start making a short guide based on my experience to be used to all  beginner fly tiers. There is a lot of info on web also in books and I’m sure that is nothing new in these articles. probably  good photos and better explanations based on my experience will help others to learn faster than I did :).

So this time I start with tails for dry flies:

Tails have the role to provide the right  balance of the fly and  also the insect print or also called silhouette  of the fly. If the fly is a spinner, or a dun the tail will have different positions. Usually this is not so important but are moments  when fish are so shy and suspicious  and if the  fly is not perfect  made will refuse it.

For classic dry flies the tail is made from different materials that float or  have a neutral density. Hair from deer, hair fibers from nutria or castor are used but the  most used materials are the barbs from rooster feathers. Unfortunately those from hen are not good for dry flies because the barbs soak water due the characteristic structure. You can see bellow how the hen barbs are stick together.

step-1-soft-feather-structure

step-2-soft-feather-close-up-fiber-structure

They behave like this because the barbs are soft and have a kind of small hooks  that will make the them to  remain  “glued”. Conclusion: barbs absorb water and will not help the fly to float.

Other feathers with the same structure are: european common partridge,  french partridge, jey, some feathers from ducks. So if you will see dry flies tied with partridge barbs as  tails , probably will look nice but will not float .

For example bellow is a feather of classic domestic rooster from the cape:

step-3-indian-rooster-feather-from-neck step-4-barbs-from-indian-rooster step-5-close-up-structure-of-indian-rooster-hackle--fibers

Those  called small hooks from the barbs are very closed to the stem of the feather. Then the barb is nice and shiny without anything else attached. The zone where the barbs have  those small “hooks” is called also soft area or soft core area. All the time you should use barbs nice and shiny and as much as possible without soft core part.

I prefer to use barbs from Spanish Coq de Leon Pardo or Coq de Leon Indio because these barbs are special,  beautiful colored, translucent and are shiny with an interesting glow  exactly like  tails of natural insects.

step-6-coq-de-leon-pardo-feather

more than that are more resistant , elastic  and without matte color zones like in the situation of the classic rooster (Indian rooster or  other European classic rooster raised for meat). For example if you take a feather from an indian cape you will notice that one part is shinny and one part is matte. You should mix the barbs to have an homogenous tail. Instead  if you use barbs from Spanish rooster the color  of the feather will remain the same for both sides of the feather.

Before fixing the barbs is good to know that too many barbs will make the fish to refuse the fly. Also  if are not enough the fly will not float for a long period of time. For this reason is better to use longer barbs instead  to have a shorter tail but thicker. Bellow I use 6 barbs for a size #12 and I like to have the tail 2 times longer than the hook shank. If are too long also the fish will detect that the insect is artificial and will spit it. Especially the grayling will do that. For example our old local fisherman  prefer to tie the flies for grayling without tail and with hackle tied collar.

Anyway is tho way to measure the tail fast and easy : using the hook shank as reference or the gap of the hook. To have uniform tails for your flies I recommend to tie the fly on the same hook size and  when you are  satisfied you should  go to the next size.

step-7--and-how-long-should-be-the-tail step-8-using-the-hook-gap-for-measuring-the-tail

In our fly tying world  the length of the tail for a dry fly (ephemera type of imitation) should be between one and half the hook shank length  up to 3 times length. Or 2 times gape size up to 4 time gape size. The length size is correlated  with the number of the barbs. For a size #12  you can have 6-8 barbs,  for a size #14  you can have 4 to 7 barbs,  for size #16 3-4 barbs and for size 18 and down you can remain at 3 barbs.

Take in consideration also that if you make a heavy dressed dry fly in hackle than also the tail should be dens. Otherwise the fly will not be  well balanced and will  not float in the proper manner .

When you fix/add materials in tying process is  good to know that  we must have relaxed hands . For this is better to have  all the time the left hand  ( in this case ) all the time supported by vice like  in the photo bellow.  In this way  you can tie flies without having tired hand. A tired hand will increase the tying time ( shaking, imprecision in adding tail fibers – for example, etc ) and  the fly will not be so nice and  homogeneous.

step-11-bear-your-arm-on-the-vice

So for this reason is very important to buy/use a vice that is ergonomic  for tying process and not only beautiful. Should be a tool that will help you to tie faster and better.

The right position for adding materials , in this situation fibers for making tails is bellow and is generated by the anatomical angles  For this reason the most relaxed way to  pinch and fix the barbs is well described by the photo bellow:

step-10-hot-to-fix-the-barbs

A 30-45 degree angle from the left to right. All the time when you fix the barbs  put them between hook shank and you and cross with tying thread. In this way the fibers will not slip and will be well fixed :

step-10-hot-to-fix-the-barbs

After a few turns pull the base of the fibers and lay them on the hook shank . Just go with the thread turns and secure the tails. To have them well fixes is better to maintain a continuous tension  in thread and with the left arm pull in the upper position the tips of the barbs. Continue with wrapping:

step-13--fixing-the-barbs--easy-and-fast

 

Now you will have a nice well fixed tail.

step-14-how-should-look-a-tail-for-a-dry-fly

If you don’t  keep the tips of the  barbs with the left arm  the thread will twist and fix the barbs orientated on the hook shank in the thread turn direction:

step-16-a-close-up-photo-of-slipped-side-tail

Probably not all pay attention at this details but a wrong fixed tail means an improper floating of the fly on the water.

Spread tail is easy to be done, just make 2 or 3 turns under the fixed barbs and you will make the barbs to stay upper and spread:

step-17-how-to-spread-the-tail

step-18-the-nice-spread-tail-for-dry-flies

 

Please don’t forget to  keep  the under body made of thread as slim as possible and  do not overload  it. Don’t forget that an adult stage of insect  have a nice and slim body with a clear and sharp body.  The insect is delicate, everything is well balanced so try to stay closer to the natural look.

tails-for-dry-flies

cheers,

Lucian

8 thoughts on “Tie Better your flies 1 – tails for dry flies

  1. Pingback: What have you been tying today? - Page 497 - The North American Fly Fishing Forum

  2. Hi Lucian,
    Thanks for terrific post and great instructions.
    I also use CdeL which I purchase from a great source in Spain.
    The same material purchased in the UK ,from my experience, is poor quality and vey high price.

    Even after many years of fly tying , I still struggle trying to set the tails .
    I find that when wet the tail fibres tend to come together into a single strand.
    I end up trying to do a figure of eight to keep them splayed but I’m never really happy with the results.
    Any suggestions would be gratefully received.
    Again thanks for a great set of helpful instructions.
    Fotwin

    • Hi Fotwin,

      Yes, agree, in Spain you’ll find a few good sellers of Leon feathers!
      About your observation: I presume that tails will come together when the fly is outside from water or when you wet the fly .This is normal: when you wet something like fibers and will go in contact will stick one with the others – is so called superficial tension ( physics stuff ). If the fly will stay in the water film the tail fibers will be spread. So don’t be worried about this :)
      If you like make a few experiments, put a fly on the water in a large glass with water to see how the fly will stay. Make a few flies based on the same model: with longer tail, with shorter tail, with spread tail, with poor hackle, with dense hackle, etc. Then make a comparison between them. Ok is a geek type of test but is fun and you will notice a lot of interesting things . If you want to complicate, use floating solution on the flies.
      In the end my advice is not to be worried about this aspect
      cheers
      Lucian

Leave a Reply to Lucian Vasies Cancel reply

Your email address will not be published. Required fields are marked *